Gear That I Use

Affiliate Links in use.

Lights - Flash

I started out with speedlites back in the day specifically Youngnuo speedlites, they were terrible. I have since moved in to a more cohesive system from Pixapro and Godox which provide a rage of studio strobes, battery powered strobes and speedlites all controlled via the Godox 2.4Ghz system.

  • Godox AD1200 Pro - This is the most powerful light I have in the kit at 1200ws. Great for both in studio and on location work when the power is needed. It spends a good bit of it’s life at the back of the studio as a global fill. This will also get used as a key light when I use my optical snoot… that thing eats light!

    You can also get an AC adapter for the 1200 Pro.

  • Godox AD600 Pro - I have two of these units and they have been brilliant on power and consistency. When ordering I also grabbed the AC mains adapters so I can use them along side my mains powered strobes on any full day shoots in the studio. They get used on my commercial product work sets .

    The AD600 Pro has now been replaced by the AD600 Pro II which is linked above.

    AC Adapter for AD600 Pro AD 600 Pro II & AD800 Pro - Handy if in the studio all day and you don’t want to have to charge batteries or wait.

    Remote Head For AD600 Pro, AD600 Pro II & AD800 Pro - Loses about .2 of a stop (that’s only 2 Tenth’s) due to the cable resistance but helps to make the head smaller for easier placement on set or booming.

  • Pixapro Storm III 600 / Godox QT 600 II - These are my go to studio mains powered strobes, as good as the battery units are they batteries just won’t last when running the modelling lights on set all day (used to aid AF). I currently have 3 of these 600ws head and they have been a huge improvement over the last generation not only for flash colour temperature but also the LED modelling light.

    Great for all kinds of studio work and very good for freezing action as they have very short flash durations even in stable colour mode.

  • Pixapro Storm III 400 /Godox QT 400 III - The baby brother to the 600ws version. I have one of these in the kit for the rare occasions I need a key light with a little less power. Power wise it has 2/3rd of a stop less than the 600w versions.

  • Godox AD300 Pro - This little battery powered 300ws flash has been great for both studio and location work. Plenty of power for a lot of work and nice and compact as well. It can also use the batteries from my AD200 and AD200 Pro lights which is handy. Godox have updated it to the AD300 Pro II.

  • Pixapro Pika 200 / Godox AD200 / AD200 Pro - Given how popular the AD200 series of lights are I expect you have heard about them or seen them in use before. Very compact whilst packing 200ws of light. I own 2 of the original AD200’s and one AD200 Pro.

    They can be used with the bare bulb head, Fresnel head, round heads, ring light, tube light. You can also combine two of them using the AD-B2 dual bracket to give you a 400ws light.

    Remote Head Cables - Handy for placing the flash head in smaller places and getting the main body of the AD200 unit tucked away or hidden. The new EC200II Extension head is compatible with the older AD200 units.

    LED Head - Godox ADL - Handy to throw on an AD200 and use as a torch or a kicker light for a video,

  • Godox V1 / Pixapro GI01 Round Head Speedlite - My preferred speedlite type for it’s cleaner pattern of light, especially over the older traditional Fresnel speedlites.

    I have one of these in the kit and it gets used for weddings, events or when I need a small light placed on set. The round head is magnetic so it’s easy to throw on a grid or gel if required.

    Round Head Grid - (AKr15) You can also stack these to tighten the beam of light further.

    Round Head Accessory Kit (AK-R1) - A handy kit with a diffusion dome, grid, barn doors, bounce card & snoot.

  • Godox V100 Round Head speedlite - The latest light added to the kit after one of my older Li-ION 580 speedlites finally gave up the ghost. 1/3rd of a stop more power than the V1 and a nice tough screen interface also. The V100 will also take any of the round head modifiers and accessories.

 

Triggers

Triggers are used to both fire and control your flashes when they are being used off camera and we have a range of options avalible within the Godox line-up. I have not owned or used every trigger they make but the ones shown and linked below are the ones I use.

  • Godox X Pro - I have a few of these and once of them lives on my tether station at the studio so I can set another on a layflat set and not have to touch the camera to change the lights.

    Powered by AA batteries. I use rechargeable but the battery meter on the is not accurate with them as they are 1.2v instead of 1.5v.

  • Godox X3 Nano - A tiny touch screen trigger. Built in battery that is UAB-C rechargeable. I was concerned about the built in battery at first but am yet to have one run out of power on a shoot.

  • Godox X3 Pro - The larger version of the X3 Nano trigger which is proving to be better for my aging eyes.

 

Lights LED - For Video

I only tend to use continuous lights for video myself so they don’t come out that often unless needed for video work.

  • Pixapro